Bilstein Tube Shock Conversion Kits

From $476.99
Part #
Application
MGB
As Configured

Transform the handling of your classic car with the Bilstein Conversion Kit! Renowned for their high quality, these MGB shock conversion kits for front and rear suspension work perfectly on both the chrome bumper and lowered rubber bumper cars. Huge improvements over stock or any tube shock kit, the Bilstein shock conversion kits lend your car more stability in corners (especially on rough roads), handle bumps much more smoothly, and ensure that you get a firm and comfortable ride experience!

 

The front fitting kit places the shock in between the steering knuckle and coil spring. The lever shock assembly is completely removed and replaced with a new upper control arm and tube shock mount. It requires some permanent modifications by cutting off the bump stock brackets on the front cross-member to allow clearance for the shock.

 

The rear conversion kit is only applicable to chrome bumper, or lowered rubber bumper cars. If your rubber bumper MGB has 1" lowering springs this kit can be used. It is a simple bolt-on install, and requires no permanent modifications. All you need to do is replace the lever shock with the provided brackets and reposition the lower bracket on the leaf spring.

The Bilstein Conversion Kits include all the necessary hardware for a perfect install. Also included are detailed instructions with diagrams of the important steps.

Note: We strongly recommend fitting the front and rear kits together for the best results.

The Longest in the Business

  • All Classic British products are warrantied to be free from defects in material and workmanship for 2 years from the date of invoice.
  • All superchargers, supercharger components, and supercharger hardware are warranted to be free from defects in material and workmanship for 1 year from date of invoice.
  • Moss Motors, Ltd. will, at its discretion, repair or replace any part that fails in service within the warranty period. This warranty does not cover labor, failure of related components, normal wear of brake or clutch components or failure resulting from alteration, misuse, accidental damage, faulty installation, or faulty repair.
  • Warranty requests should be submitted to our sales department and must be supported by the original Moss Motors purchase invoice and documentation of the failure.
Make: MG Model: MGB Series: RD, GT Year: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980