Rear Fender Leading Edge Repair Panel - Left
Application - See "Fitment" Tab
This is a new repair panel for the leading edge of the rear fender, just behind the door. This is a common area that likes to rust out on the TR4, TR4A, TR250 and TR6. Each panel has a rolled leading edge that is not completely crimped closed so as to accept your existing inner mounting bracket. Once the mounting bracket is installed into the leading edge you finish crimping the edge tight to your inner mounting bracket and weld accordingly. The panel also has a "step" that is formed into the rear edge of the part for you to lay your fender into to make a nice lap and still end up flush after welding and grinding. It is made of 20GA steel and is ready to be welded onto your fender.
|Triumph TR2, 3, 4||Body Panels & Structure||Rear Body Panels TR4-4A||31||REPAIR PANEL||TR4-4A||1|
|Triumph TR6, 250||Body Panels & Structure||Rear Body Panels TR250||65||REPAIR PANEL||TR250||1|
|Triumph TR6, 250||Body Panels & Structure||Rear Body Panels TR6||80B||REPAIR PANEL||TR6||1|
The Longest in the Business
- All Classic British products are warrantied to be free from defects in material and workmanship for 2 years from the date of invoice.
- All superchargers, supercharger components, and supercharger hardware are warranted to be free from defects in material and workmanship for 1 year from date of invoice.
- Moss Motors, Ltd. will, at its discretion, repair or replace any part that fails in service within the warranty period. This warranty does not cover labor, failure of related components, normal wear of brake or clutch components or failure resulting from alteration, misuse, accidental damage, faulty installation, or faulty repair.
- Warranty requests should be submitted to our sales department and must be supported by the original Moss Motors purchase invoice and documentation of the failure.
Location: Left Side