Body Rubber Kit

Save 10% off individual prices when you purchase the whole kit! Moss Classic Jaguar sells the most comprehensive rubber kits in the business. If you want the best kit on the market, here it is. Our kits are designed to provide everything you need for a comprehensive, bare-metal repaint. All door, boot, lamp and glass seals are included. Interior and engine compartment items are not.

Part Number	Description	Qty Per Kit	Notes
BD18947/3	BUMPER SEAL, FRONT	2	Between front bumpers and body; ends retained by BD10313 clip
BD10313	CLIP, FRONT BUMPER SEAL	4	Secures front bumper-to-body seal
BD21073/4	DOOR WINDOW SEAL	2	Outer squeegee seal for door glass; retained by outer trim
BD22312	TRIM CLIP, DOOR FUZZY STRIPS	10	Retain inner fuzzy strips on door glass
BD22536	GAS LID BUFFER	2	Small rubber buttons to cushion gas filler lid
BD23347	HATCH SEAL	1	Seals Rear Hatch Door to body
BD28434-1	SHUT FACE SEAL	2	Seals rear edge of door; fits into channel on body
BD28447/1	LWB SILL SEAL	2	Seals bottom of door at sill/rocker panel; fits into channel
BD28523	RUBBER BUFFER	8	Square rubber pad, between body and front bumper brackets (See Note #1)
BD35733	MARKER GASKET, REAR	2	Between rear side marker lamps and body
BD35977/1	BUMPER SEAL, REAR	1	Between rear bumper and body
BD37726	MARKER GASKET, FRONT	2	Between front side marker lamps and body
BD38155	LAMP PAD, RH	1	Rubber between tail lamp and body (See Note #2)
BD38156	LAMP PAD, LH	1	Rubber between tail lamp and body (See Note #2)
12339	LAMP GASKET	1	Between license lamp housing and license lamp lens
159-110	LAMP GASKET	4	Seals reverse lamp lenses and reverse lamp body
209	OVER RIDER SEAL	8	Between bumper over riders and bumpers
164-060	HEADLAMP GASKET	2	Seals headlamp unit to body
BD20903/1	COWL SEAL	1	Cushions rear edge of bonnet, glued into channel near base of windshield
12426	LENS PAD, TURN SIGNALS	2	Pad between turn signal lenses and turn signal lamp body
8608-2L	LAMP PAD, LH	1	Gasket between front turn signal lamp and body, left
8608-2R	LAMP PAD, RH	1	Gasket between front turn signal lamp and body, right
38-2008	FOAM LENS PAD	2	Foam pad between tail lamp lenses and tail lamp bodies
18-2015-1	A-POST SEAL, PAIR	1 PR	Major seal for leading edge and tops of doors; glued to body
BD21964/2	OUTER DOOR FRAME "T" SEAL	8'	Seals outer perimeter of door window frame
BD20499-5	WINDSHIELD SEAL, FRONT	1	Holds windshield in place -- requires locking strip below
BD20499-1	W/S LOCK STRIP	23'	Fits in channel of windshield seals; expands it to make tight seal
BD20309	BACKLITE SEAL	1	Seal for rear hatch window to body; use with BD20499-1 lock strip
38-2020	CHANNEL FELT	16'	For door glass channels. Push in to channels and trim flush.
38-2024	QUARTER WINDOW PILLAR SEAL	5'	Leading edge of rear quarter window pillars
18-2026	QUARTER WINDOW SEAL	9'	Seals rear quarter windows to body
11728	LENS GASKET	4	Seals side marker lenses to chrome lamp housing
BD35729	HEADLIGHT RUBBER	2	Between body and headlamp opening finishers (See Note #3)
BD16700	WINDOW SEAL	2	Squeegee seal; between door and outer surface of door glass. Clips in place
BD20010/3-2	32" FUZZY STRIP	2	Fuzzy seal; between door and inner surface of door glass, clips in place
8656	BEZEL PAD	2	Under chrome windshield wiper bezels
BD20434	MUDSHIELD SEAL	7'	Mud shields under bonnet; riveted in place

Notes
1: These were fitted to the rear of later cars, but many customers prefer to fit them at all attaching points. Use as you see fit.
2: There are two tail lamp configurations but only one gasket type is available. You may have to trim the middle to clear the bulb sockets.
3: Does not have pre-drilled holes. Holes for attaching rivets must be cut by customer.
Also note that you might not receive one continuous piece of rubber in some cases where the items is sold per foot. You might receive two pieces at least five feet long when the car requires a total of ten feet.

Note: This item replaces part number 18-0514.