Performance Camshafts
WARNING: May contain chemicals that may cause cancer or reproductive harm.
Put a little more performance in your engine with a new steel billet performance cam! These cams mate to the appropriate A+ slot drive oil pump, and must be installed as a set. Both cams feature pressure fed oiling to the lobes and distributor drive gear.
114-160 Fast Road Cam, Slot Drive
Power Band: 1500-5500
Duration at 0.0158" cam lift: 257 inlet 257 exhaust
Duration at 0.0500" cam lift: 214 inlet 214 exhaust
Valve Lift, gross, 1.26 ratio: 340"
Giving a smooth idle, this cam is a great street driver as it gives a balance of low and high end improvement. This is the best cam for supercharged engines as it gives a higher valve lift without too much duration.
114-165 Fast Road/Rally Cam, Slot Drive
Power Band 1900-5800
Duration at 0.0158" cam lift: 270 inlet 270 exhaust
Duration at 0.0500" cam lift: 224 inlet 224 exhaust
Valve Lift, gross, 1.26 ratio: .353"
This gives a slightly lumpy idle, but gives strong mid and high end power. Suitable for street use, but you wouldn't want to get stuck in stop and go traffic.
114-040 Slot Drive Oil Pump, 948 - 1098cc
This is the standard pump as fitted originally to the 948cc A+ engines. The three bolt mounting fits 948cc and 1098cc engines.
114-034 Slot Drive Oil Pump, 1275cc
This is the standard pump as fitted originally to the 1275cc A+ engines. It is an improvement over the earlier 1275cc star drive pump.
114-039 Turbo High Output Slot Drive Oil Pump, 1275cc
Originally fitted to the MG Metro Turbo, this pump provides 25% more flow than stock which keeps oil pressure constant under hard use and is a performance upgrade to the stock pump. Fits 1275cc block only, requires modification to oil pump cover.
The Longest in the Business
- All Classic British products are warrantied to be free from defects in material and workmanship for 2 years from the date of invoice.
- All superchargers, supercharger components, and supercharger hardware are warranted to be free from defects in material and workmanship for 1 year from date of invoice.
- Moss Motors, Ltd. will, at its discretion, repair or replace any part that fails in service within the warranty period. This warranty does not cover labor, failure of related components, normal wear of brake or clutch components or failure resulting from alteration, misuse, accidental damage, faulty installation, or faulty repair.
- Warranty requests should be submitted to our sales department and must be supported by the original Moss Motors purchase invoice and documentation of the failure.