Pertronix Ignitor Electronic Ignition
From
$189.99
Note
Not for use with solid core wires. Use of resistance core ignition wires or resistor type plugs required.
WARNING: May contain chemicals that may cause cancer or reproductive harm.
Solid State reliability, with no external control box. Hall effect sensor is impervious to dirt, dust, or moisture. Check the distributor cam profile carefully before ordering. High lift cams were installed in units with suffix E or subsequent letters. As a rule of thumb, the MG TC and early MG TD had an Asymmetric cam. The later MG TD and some of the MG TF had a Symmetric cam. The later MG TF had a High Lift cam.
To ID your distributor cam, measure distance across the flats:
0.704" = Asymmetric
0.661" = Symmetric
0.640" = High lift
If the condenser is soldered in you must use 152-900 base plate.
To ID your distributor cam, measure distance across the flats:
0.704" = Asymmetric
0.661" = Symmetric
0.640" = High lift
If the condenser is soldered in you must use 152-900 base plate.
The Longest in the Business
- All Classic British products are warrantied to be free from defects in material and workmanship for 2 years from the date of invoice.
- All superchargers, supercharger components, and supercharger hardware are warranted to be free from defects in material and workmanship for 1 year from date of invoice.
- Moss Motors, Ltd. will, at its discretion, repair or replace any part that fails in service within the warranty period. This warranty does not cover labor, failure of related components, normal wear of brake or clutch components or failure resulting from alteration, misuse, accidental damage, faulty installation, or faulty repair.
- Warranty requests should be submitted to our sales department and must be supported by the original Moss Motors purchase invoice and documentation of the failure.