Body Rubber Kit
$819.99
Part #
38-0513
Application
E-Type Ser. 2 FHC
WARNING: May contain chemicals that may cause cancer or reproductive harm.
Save 10% off individual prices when you purchase the whole kit! Moss Classic Jaguar sells the most comprehensive rubber kits in the business. If you want the best kit on the market, here it is. Our kits are designed to provide everything you need for a comprehensive, bare-metal repaint. All door, boot, lamp and glass seals are included. Interior and engine compartment items are not.
Notes
1: These were fitted to the rear of later cars, but many customers prefer to fit them at all attaching points. Use as you see fit.
2: There are two tail lamp configurations but only one gasket type is available. You may have to trim the middle to clear the bulb sockets.
3: Does not have pre-drilled holes. Holes for attaching rivets must be cut by customer.
| Part Number | Description | Qty Per Kit | Notes |
|---|---|---|---|
| BD18947/3 | BUMPER SEAL, FRONT | 2 | Between front bumpers and body; clips are used to secure (included with kit) |
| BD10313 | CLIP, BUMPER and WINDOW SEAL | 14 | Secures front bumper-to-body seal (4) and door squeege seal (14) |
| BD28523 | RUBBER BUFFER | 8 | Square rubber pad, between body and front bumper brackets (See Note #1) |
| BD22536 | GAS LID BUFFER | 2 | Small rubber buttons to cushion gas filler lid |
| BD24789 | SILL SEAL | 2 | At bottom of door openings, proper molded type; glued in place |
| BD23347 | HATCH SEAL | 1 | Seals Rear Hatch Door |
| BD25898/99 | SEAL, SHUT POST | 1 PR | Door jamb at rear, glued in channel; proper molded in top curve |
| BD35733 | MARKER GASKET, REAR | 2 | Between rear side marker lamps and body |
| BD35977/1 | BUMPER SEAL, REAR | 1 | Between rear bumper and body |
| BD37726 | MARKER GASKET, FRONT | 2 | Between front side marker lamps and body |
| BD38155 | LAMP PAD, RH | 1 | Rubber between tail lamp body and body (See Note #2) |
| BD38156 | LAMP PAD, LH | 1 | Rubber between tail lamp body and body (See Note #2) |
| 12339 | LAMP GASKET | 1 | Between license lamp housing and license lamp lens |
| 159-110 | LAMP GASKET | 4 | Seals reverse lamp lenses and reverse lamp body |
| 209 | OVER RIDER SEAL | 8 | Between bumper over riders and bumpers |
| 164-060 | HEADLAMP GASKET | 2 | Seals headlamp unit to body |
| BD20903/1 | COWL SEAL | 1 | Cushions rear edge of bonnet, glued into channel near base of windshield |
| 12426 | LENS PAD, TURN SIGNALS | 2 | Pad between turn signal lenses and turn signal lamp body |
| 8608-2L | LAMP PAD, LH | 1 | Gasket between front turn signal lamp and body, left |
| 8608-2R | LAMP PAD, RH | 1 | Gasket between front turn signal lamp and body, right |
| 38-2008 | FOAM LENS PAD | 2 | Foam pad between tail lamp lenses and tail lamp bodies |
| BD25716/7 | A-POST SEAL, PAIR | 1 PR | Major seal for leading edge and tops of doors; glued to body |
| BD21964/2 | OUTER DOOR FRAME "T" SEAL | 8' | Seals outer perimeter of door window frame |
| BD20499 | WINDSHIELD SEAL | 1 | Holds windshield in place -- requires locking strip below |
| BD20499-1 | W/S LOCK STRIP | 21' | Fits in channel of windshield seals; expands it to make tight seal |
| BD20309 | BACKLITE SEAL | 1 | Seal for rear hatch window to body; use with BD20499-1 lock strip |
| 38-2020 | CHANNEL FELT | 14' | For door glass channels. Push in to channels and trim flush. |
| 38-2024 | QUARTER WINDOW PILLAR SEAL | 5' | Leading edge of rear quarter window pillars |
| 18-2026 | QUARTER WINDOW SEAL | 9' | Seals rear quarter windows to body |
| 11728 | LENS GASKET | 4 | Seals side marker lenses to chrome lamp housing |
| BD35729 | HEADLIGHT RUBBER | 2 | Between body and headlamp opening finishers (See Note #3) |
| BD16700 | WINDOW SEAL | 2 | Squeegee seal; between door and outer surface of door glass. Clips in place |
| BD20010/3 | 24" FUZZY STRIP | 2 | Fuzzy seal; between door and inner surface of door glass, clips in place |
| BD22312 | CLIP FOR FUZZY STRIP | 10 | Attaches fuzzy window seal |
| 8656 | BEZEL PAD | 3 | Under chrome windshield wiper bezels |
| BD20434 | MUDSHIELD SEAL | 7' | Mud shields under bonnet; riveted in place |
Notes
1: These were fitted to the rear of later cars, but many customers prefer to fit them at all attaching points. Use as you see fit.
2: There are two tail lamp configurations but only one gasket type is available. You may have to trim the middle to clear the bulb sockets.
3: Does not have pre-drilled holes. Holes for attaching rivets must be cut by customer.
Note: This item replaces part number 18-0513.
| Model (Site) | Category | Schematic | Key | Name | Application | Qty |
|---|---|---|---|---|---|---|
| Jaguar E-Type | Body Fittings | Body Rubber Kits | 1 | BODY RUBBER KIT | E-Type Series II FHC | 1 |
The Longest in the Business
- All Classic British products are warrantied to be free from defects in material and workmanship for 2 years from the date of invoice.
- All superchargers, supercharger components, and supercharger hardware are warranted to be free from defects in material and workmanship for 1 year from date of invoice.
- Moss Motors, Ltd. will, at its discretion, repair or replace any part that fails in service within the warranty period. This warranty does not cover labor, failure of related components, normal wear of brake or clutch components or failure resulting from alteration, misuse, accidental damage, faulty installation, or faulty repair.
- Warranty requests should be submitted to our sales department and must be supported by the original Moss Motors purchase invoice and documentation of the failure.
Product Name:
Body Rubber Kit
Make:
Jaguar
Model:
E-Type
Year:
1969, 1970, 1971