Feedback +

If you would like a response, please supply your email

Performance Camshaft by Comp Cams

From $899.99
Part #
Application
TC, TD, TF
As Configured

The Comp Cams camshaft differs from the original cam in several ways. Although made for a vintage application, the design incorporates more modern thinking. First, it is made of steel instead of cast iron. The original cam had lobes that have very steep ramps and a very "pointed" or "sharp" nose. This puts high loads on the cam and the base of the tappet, which in turn reduces the useful life of the engine. The lobes on the stock cam are also "flat", meaning they are the same height from edge to edge. All of these features were eliminated from cam designs in the '60s. The engineers designed a cam with the same lift, duration, and cam timing as the stock cam with a larger-than-stock base circle. This reduces the steepness of the ramps and allows the nose to be more rounded. The lobes of the cam are tapered, which improves tappet rotation if the tappets are crowned to match the taper of the cam lobes. Because the base circle is larger, shorter pushrods are advised, and the lower oil holes in the tappet body must be machined to provide proper lubrication for the cam. Moss have a set of specially prepared tappets (433-365) and shorter pushrods (433-335) designed to go with this cam. The Comp Cams cam, tappets, and short pushrods are made for each other, and together they will provide years of reliable service, far outlasting stock components. Properly fitted and broken in following our comprehensive instructions, these cams, tappets and pushrods will perform as well as any stock cam, but they have the potential for giving good service for more years and miles than the original design.

The Longest in the Business

  • All Classic British products are warrantied to be free from defects in material and workmanship for 2 years from the date of invoice.
  • All superchargers, supercharger components, and supercharger hardware are warranted to be free from defects in material and workmanship for 1 year from date of invoice.
  • Moss Motors, Ltd. will, at its discretion, repair or replace any part that fails in service within the warranty period. This warranty does not cover labor, failure of related components, normal wear of brake or clutch components or failure resulting from alteration, misuse, accidental damage, faulty installation, or faulty repair.
  • Warranty requests should be submitted to our sales department and must be supported by the original Moss Motors purchase invoice and documentation of the failure.