Front Seat & Console Kit, XK150 DHC
WARNING: May contain chemicals that may cause cancer or reproductive harm.
This is a top-quality leather seat and console re-cover kit for XK150 with the handbrake located on the left side of the transmission tunnel and "pointed" seat flutes. Regarding flutes:
There are two types of XK150 seat backs, with outer flutes that are either pointed (most DHC and FHC) or rounded/curved (most OTS). They look quite similar. As many cars have not been re-upholstered with non-original patterns, use these methods to determine curved/round flutes vs. pointed flutes.
If the seat covers are removed and the seat frames are bare, measure between the two top bolt holes in the seat back tubular frames. Seats with curved/rounded pleats will measure about 17" (43.8cm) at this point. Cars with pointed pleats will measure about 15.5" (39.37cm).
If seat covers are in place, measure 4.5" (114mm) down from the center of the seat back and then measure from side to side. Seats with curved/rounded pleats will measure about 22" (55.88cm) at this point. Cars with pointed pleats will measure about 20" (50.8cm).
Please note this is a special order and cannot be returned.
The Longest in the Business
- All Classic British products are warrantied to be free from defects in material and workmanship for 2 years from the date of invoice.
- All superchargers, supercharger components, and supercharger hardware are warranted to be free from defects in material and workmanship for 1 year from date of invoice.
- Moss Motors, Ltd. will, at its discretion, repair or replace any part that fails in service within the warranty period. This warranty does not cover labor, failure of related components, normal wear of brake or clutch components or failure resulting from alteration, misuse, accidental damage, faulty installation, or faulty repair.
- Warranty requests should be submitted to our sales department and must be supported by the original Moss Motors purchase invoice and documentation of the failure.