Body Rubber Kit
$799.99
Part #
38-0511
Application
E-Type Ser. 1 2+2
Save 10% off individual prices when you purchase the whole kit! Moss Classic Jaguar sells the most comprehensive rubber kits in the business. If you want the best kit on the market, here it is. Our kits are designed to provide everything you need for a comprehensive, bare-metal repaint. All door, boot, lamp and glass seals are included. Interior and engine compartment items are not.
Notes
1: These were fitted to the rear of later cars, but many customers prefer to fit them at all attaching points. Use as you see fit.
2: Does not have pre-drilled holes; customer must drill holes for attachment rivets.
Part Number | Description | Qty Per Kit | Notes |
---|---|---|---|
BD10313 | CLIP | 4 | Secure front bumper rubber ends |
BD15746 | LAMP GASKET | 2 | License Lamp, Inner |
BD18947/1 | BUMPER SEAL, REAR | 2 | Between rear bumpers and body |
BD18947/3 | BUMPER SEAL, FRONT | 2 | Between front bumpers and body; secured with BD10313 clips |
BD21073/4 | WINDOW WIPE | 2 | Door Window Squeegee Seals |
BD22312 | CLIP | 10 | Secures "fuzzy strips" on inner surface of door glass |
BD22536 | GAS LID BUFFER | 2 | Small rubber buttons to cushion gas filler lid |
BD23347 | HATCH SEAL | 1 | Seals rear hatch/door to body |
BD28447/1 | SILL SEAL | 2 | At bottom of door openings, proper molded type; glued in place |
BD28050 | WINDSHIELD SEAL | 1 | Secures windshield to body; used with BD20499-1 lock strip |
BD28434-1 | SHUT FACE SEAL | 2 | Seals trailing edge of doors |
BD28447/1 | LWB SILL SEAL | 2 | Seals bottom edge of doors at rockers/sills |
BD28523 | RUBBER BUFFER | 8 | Square rubber pad, between body and front bumper brackets (See Note #1) |
BD6581 | RUBBER PLUG | 4 | Seals holes behind license plate |
8607 | TURN SIGNAL LENS PAD | 1 PR | Pads between front turn signal lenses and lamp body |
8620 | REAR LENS PADS | 1 PR | Pads between rear lenses and lamp body |
8716 | LAMP GASKET | 1 | Gasket between reverse lamp lens and lamp body |
8717 | LAMP GASKET | 1 | Gasket, reverse lamp body |
8773 | LENS GASKET | 2 | License lamps |
164-060 | HEADLAMP GASKET | 2 | Seals headlamp unit to body |
38-00232 | OVER RIDER SEAL | 6' | Seal between over riders and bumpers |
BD20903/1 | COWL SEAL | 1 | Cushions rear edge of bonnet, glued into channel near base of windshield |
8608 | FRONT LAMP PADS | 1 PR | Pad between front lamps and body |
11136 | LAMP PAD, LHR | 1 | Left Tail Lamp to Body Pad |
11137 | LAMP PAD, RHR | 1 | Right Tail Lamp to Body Pad |
BD30301 | A-POST SEAL | 2 | Major seal for leading edge and tops of doors; glued to body |
BD21964/2 | DOOR FRAME "T" SEAL | 10' | On outer perimeter of door window frames |
BD20499-1 | W/S LOCK STRIP | 23' | Fits in channel of windshield seals; expands it to make tight seal |
BD20309 | WINDSHIELD SEAL, REAR | 1 | Holds rear window in place; used with BD20499-1 locking strip |
38-2020 | CHANNEL FELT | 16' | For door glass channels. Push in to channels and trim flush. |
18-2026 | QUARTER WINDOW SEAL | 9' | Seals quarter windows to body |
BD35729 | HEADLAMP FINISHER SEAL | 2 | Seal under headlamp chrome finishers (See Note #2) |
BD20010/3-2 | 32" FUZZY STRIP | 2 | Cushions inner surface of door glass, mounts with BD22312 clips |
8656 | BEZEL PAD | 3 | Under chrome windshield wiper bezels |
BD20434 | MUDSHIELD SEAL | 6' | Mud shields under bonnet; riveted in place |
Notes
1: These were fitted to the rear of later cars, but many customers prefer to fit them at all attaching points. Use as you see fit.
2: Does not have pre-drilled holes; customer must drill holes for attachment rivets.
Note: This item replaces part number 18-0511.
Model (Site) | Category | Schematic | Key | Name | Application | Qty |
---|---|---|---|---|---|---|
Jaguar E-Type | Body Fittings | Body Rubber Kits | 1 | BODY RUBBER KIT | E-Type Series I 2+2 | 1 |
The Longest in the Business
- All Classic British products are warrantied to be free from defects in material and workmanship for 2 years from the date of invoice.
- All superchargers, supercharger components, and supercharger hardware are warranted to be free from defects in material and workmanship for 1 year from date of invoice.
- Moss Motors, Ltd. will, at its discretion, repair or replace any part that fails in service within the warranty period. This warranty does not cover labor, failure of related components, normal wear of brake or clutch components or failure resulting from alteration, misuse, accidental damage, faulty installation, or faulty repair.
- Warranty requests should be submitted to our sales department and must be supported by the original Moss Motors purchase invoice and documentation of the failure.
Product Name:
Body Rubber Kit
Make:
Jaguar
Model:
E-Type
Year:
1961, 1962, 1963, 1964, 1965, 1966, 1967