Body Rubber Kit

Part #
E-Type Ser. 1.5 FHC
Low Stock Low Stock
Save 10% off individual prices when you purchase the whole kit! Moss Classic Jaguar sells the most comprehensive rubber kits in the business. If you want the best kit on the market, here it is. Our kits are designed to provide everything you need for a comprehensive, bare-metal repaint. All door, boot, lamp and glass seals are included. Interior and engine compartment items are not.

Part Number Description Qty Per Kit Notes
BD10313 CLIP 16 Secure front bumper rubber (2) and door glass squeegee strips (14)
BD15746 LAMP GASKET 2 License Lamp, Inner
BD18947/1 BUMPER SEAL, REAR 2 Between rear bumpers and body
BD18947/3 BUMPER SEAL, FRONT 2 Between front bumpers and body; secured with BD10313 clips (2)
BD22312 CLIP 10 Secures fuzzy strips on inner surface of door glass
BD22536 GAS LID BUFFER 2 Small rubber buttons to cushion gas filler lid
BD23347 HATCH SEAL 1 Seals rear hatch/door to body
BD24789 SILL SEAL 2 At bottom of door openings, proper molded type; glued in place
BD25898/99 SEAL, SHUT POST 1 PR Door jamb at rear, glued in channel; proper molded in top curve
BD28523 RUBBER BUFFER 8 Square rubber pad, between body and front bumper brackets (See Note #1)
BD6581 RUBBER PLUG 4 Seals holes behind license plate
8607 TURN SIGNAL LENS PAD 1 PR Pads between front turn signal lenses and lamp body
8620 REAR LENS PADS 1 PR Pads between rear lenses and lamp body
8716 LAMP GASKET 1 Gasket between reverse lamp lens and lamp body
8717 LAMP GASKET 1 Gasket, reverse lamp body
8773 LENS GASKET 2 License lamps
164-060 HEADLAMP GASKET 2 Seals headlamp unit to body
38-0023 OVER RIDER SEAL 6' Seal between over riders and bumpers
BD20903/1 COWL SEAL 1 Cushions rear edge of bonnet, glued into channel near base of windshield
8608 FRONT LAMP PADS 1 PR Pad between front lamps and body
11136 LAMP PAD, LHR 1 Left Tail Lamp to Body Pad
11137 LAMP PAD, RHR 1 Right Tail Lamp to Body Pad
BD25716/7 A-POST SEAL, PAIR 1 PR Major seal for leading edge and tops of doors; glued to body
BD21964/2 DOOR FRAME T SEAL 8' On outer perimeter of door window frames
BD20499 WINDSHIELD SEAL, FRONT 1 Holds windshield in place -- requires locking strip below
BD20499-1 W/S LOCK STRIP 22' Fits in channel of windshield seal; expands it to make tight seal
BD20309 WINDSHIELD SEAL, REAR 1 Holds rear window in place -- requires locking strip below
38-2020 CHANNEL FELT 14' For door glass channels. Push in to channels and trim flush.
38-2024 QUARTER WINDOW PILLAR SEAL 6' Seals vertical section of rear quarter windows
18-2026 QUARTER WINDOW SEAL 9' Seals quarter windows to body
BD35729 HEADLIGHT RUBBER 2 Under chrome finishers, perimeter of headlight sugarscoops
BD16700 WINDOW SEAL 2 Squeegee seal; between door and outer surface of door glass. Clips in place
BD20010/3 24 inch FUZZY STRIP 2 Fuzzy seal; between door and inner surface of door glass, clips in place
8656 BEZEL PAD 3 Under chrome windshield wiper bezels
BD20434 MUDSHIELD SEAL 7' Mud shields under bonnet; riveted in place

1: These were fitted to the rear of later cars, but many customers prefer to fit them at all attaching points. Use as you see fit.

Note: This item replaces part number 18-0519.

Model (Site) Category Schematic Key Name Application Qty
Jaguar E-Type Body Fittings Body Rubber Kits 1 BODY RUBBER KIT E-Type Series 1.5 FHC 1

The Longest in the Business

  • All Classic British products are warrantied to be free from defects in material and workmanship for 2 years from the date of invoice.
  • All superchargers, supercharger components, and supercharger hardware are warranted to be free from defects in material and workmanship for 1 year from date of invoice.
  • Moss Motors, Ltd. will, at its discretion, repair or replace any part that fails in service within the warranty period. This warranty does not cover labor, failure of related components, normal wear of brake or clutch components or failure resulting from alteration, misuse, accidental damage, faulty installation, or faulty repair.
  • Warranty requests should be submitted to our sales department and must be supported by the original Moss Motors purchase invoice and documentation of the failure.
Make: Jaguar Model: E-Type Year: 1968