Body Rubber Kit
$929.99
Part #
38-0517
Application
Jag Mk II early
WARNING: May contain chemicals that may cause cancer or reproductive harm.
Save 10% off individual prices when you purchase the whole kit! Moss Classic Jaguar sells the most comprehensive rubber kits in the business. If you want the best kit on the market, here it is. Our kits are designed to provide everything you need for a comprehensive, bare-metal repaint. All door, boot, lamp and glass seals are included. Interior and engine compartment items are not.
Note: This seal is often thought to be too long. It's not. As per factory instructions, install it to the body first -- then install the glass. The secret is to work the seal far into the corners. This will take up the excess rubber and ensure a tight seal.
| Part Number | Description | Qty Per Kit | Notes |
|---|---|---|---|
| BD10224 | RUBBER BUFFER | 2 | Cushion bonnet to body, front |
| BD16992 | WINDSHIELD SEAL, REAR | 1 | Rear glass to body; does not use locking strip, unlike most other Jaguar glass |
| BD17048/9 | NDV SEALS, PAIR | 1 PR | Front quarter windows, aka non draft/draught vent |
| BD17847-1 | SKIRT SEAL | 2 | Between body and rear fender skirts/spats; self adhesive |
| BD22312 | CLIPS | 8 | Attach door window fuzzy strips to upper door |
| BD26888 | WINDSHIELD SEAL, FRONT | 1 | Front windshield to body (See Note #1) |
| BD4321 | RUBBER BUFFER | 8 | For wheel skirts/spats (6) and fuel filler door (2) |
| BD4920/3 | BONNET REST RUBBER | 1 | Cushions bonnet at rear; fits on sheet metal flange |
| BD4951 | SEDAN BUFFER | 6 | Cushion bonnet to body, rear (2) and rear doors to body (4) |
| BD6581 | RUBBER PLUG | 4 | Behind License Plate; Rounded rectangles |
| BD9898 | PIPE GROMMET | 1 | Gas filler to body |
| C4928 | JACK POINT PLUG | 4 | Fit in tubes below rocker panels |
| 3488 | LENS SEAL | 1 | License lens gasket |
| 3489 | LICENSE LAMP SEAL | 1 | License lamp to body |
| 8059 | LAMP BOOT | 2 | Front turn signal lamps above bumper/below headlamps |
| 8083 | LENS SEAL, REAR | 2 | Between tail lamp lenses and tail lamp body; same right or left |
| 8669 | O-RING FENDER LAMPS | 2 | O-ring between lamps at top of fender and lamp units |
| 164-050 | HEADLAMP PAD | 2 | Between body and headlamp units |
| 3446 | LAMP SEAL | 2 | Under chrome rims on headlamps |
| 38-0023 | OVER RIDER SEAL | 8' | Between bumpers and over riders (6') and license lamp chrome to body (2') |
| 7769 | BEZEL PAD | 2 | Under chrome windshield washer bezels |
| BD4875 | TRUNK SEAL | 13' | Seals trunk/boot lid to body |
| BD20499-1 | WINDSHIELD LOCK STRIP | 11' | Fits inside channel on front windshield seal to make a tight seal |
| 38-2024 | RUBBER SEAL | 6' | Seals rear quarter windows to body |
| BD20010/3 | 24 inch FUZZY STRIP | 8 | Inner surface of door glass; at tops of doors |
| 38-4020 | CHANNEL FELT | 18' | Pushed in to door glass channels and trimmed flush |
| 38-4090 | DOOR SEAL KIT | 1 | Door seals for all four doors |
| 38-4094 | BUMPER SEAL | 6 | Between rear bumper and body |
| 8088 | LAMP PAD PAIR | 1 PR | Rubber pad between tail lamps and body |
| BD9876 | SCUTTLE SEAL | 1 | Seals vent in scuttle at base of windshield |
Note: This seal is often thought to be too long. It's not. As per factory instructions, install it to the body first -- then install the glass. The secret is to work the seal far into the corners. This will take up the excess rubber and ensure a tight seal.
Note: This item replaces part number 18-0517.
| Model (Site) | Category | Schematic | Key | Name | Application | Qty |
|---|---|---|---|---|---|---|
| Jaguar Early Sedans | Body Fittings | Rear Body Rubber, Mk I, Mk II | BODY RUBBER KIT | Mk II early | 1 |
The Longest in the Business
- All Classic British products are warrantied to be free from defects in material and workmanship for 2 years from the date of invoice.
- All superchargers, supercharger components, and supercharger hardware are warranted to be free from defects in material and workmanship for 1 year from date of invoice.
- Moss Motors, Ltd. will, at its discretion, repair or replace any part that fails in service within the warranty period. This warranty does not cover labor, failure of related components, normal wear of brake or clutch components or failure resulting from alteration, misuse, accidental damage, faulty installation, or faulty repair.
- Warranty requests should be submitted to our sales department and must be supported by the original Moss Motors purchase invoice and documentation of the failure.
Make:
Jaguar
Model:
Mk II